2025
HMGMA Exhibition
Hyundai Motor Group Metaplant America · Ellabell, GA
- Motorized skylights on a space-frame roof
- Skylight glazing and sealant
- Window and door systems
SKYLIGHTS · SPACE FRAMES · MEGA LOUVERS · ARCHITECTURAL METAL
Specialty Envelope Systems & Architectural Metal
Oversized skylights, space frames and mega louvers are won or lost before the crane arrives. PROCON E&C prepares the lift and rigging plan itself, sets the safety plan and agrees on the sequence with the other trades, so each pick is planned to go right the first time, keeping crane standby and schedule impact to a minimum. The same crews install architectural metal panels and the doors, windows, ceilings and finishes around them.
Concept video · 35 s Planned Lift — lift and rigging plans prepared in-house
- 01Lift & rigging plan
- 02Choosing the lift method
- 03Before the pick
- 04Motorized skylight
- 05Rooftop units (RTU · MAU)
HOW WE WORK
WON BEFORE THE CRANE ARRIVES
A pick that does not finish the first time comes back as crane standby hours and schedule delays. PROCON prepares the plan itself and does the work up front, in four steps.
01
Lift & Rigging Plan
Load calculations, crane position, rigging and pick sequence, prepared by PROCON and settled before the crane is on site.
02
Safety Plan
Exclusion zone and barricades set, and a pre-lift meeting with everyone on the pick before the load leaves the ground.
03
Trade Coordination
Sequence, access and hold points worked out with the steel, roofing and glazing trades, so the opening and the path are ready on pick day.
04
Lift Execution
Planned so each pick goes right the first time, minimizing crane standby and schedule impact. Our own crew then sets, fastens and seals each piece.
WHAT WE BUILD
WHAT WE SELF-PERFORM
Skylights on space-frame roofs
Skylight systems on space-frame roofs, including motorized operable units, glazing, sealant and flashing.
Mega louvers
Industrial louvers in large wall openings, framed, anchored and sealed into the building envelope.
Crane-set assemblies
Large skylight, louver and cladding assemblies set by crane on a planned pick.
ACM and composite panels
Aluminum composite material (ACM) and composite panel systems, with sub-framing, flashing and sealant.
Decorative and curved panels
Decorative metal panels and curved panels for facades and feature walls.
Stadium and arena cladding
Exterior metal cladding for stadiums and arenas.
Subroof and metal roof
Subroof and roof sub-framing, with metal roof panels.
Doors, windows and interiors
Doors, windows and glazing, louvers, ceilings, partitions and finishes under Divisions 07, 08 and 09.
TYPICAL SCOPE
TYPICAL SCOPE
Specialty envelope
- Motorized skylights on space-frame roofs
- Skylight glazing, sealant and flashing
- Industrial and mega louvers
- Crane-set envelope assemblies
- Lift and rigging plan, prepared by PROCON
Architectural metal
- ACM and composite panel systems
- Decorative metal panels
- Curved panels
- Stadium and arena exterior cladding
- Subroof and roof sub-framing
- Metal roof panels
Divisions 07 · 08 · 09
- Doors
- Windows, glazing and storefront
- Louvers and vents
- Ceilings
- Partitions
- Finishes
ON SITE
FROM THE JOBSITE
PROJECT EXPERIENCE
WORK WE HAVE BUILT
Each card lists the scope we actually built on that job. Owners are named for identification only.
Skylights on a space-frame roof
Industrial mega louvers
- S-JV battery plant · Industrial mega louvers
Fabrication
Louver frames fabricated in our affiliated metal shop
WHY PROCON
About PROCONSelf-perform workforce
About 110 people, with work-authorized W-2 crews from PROCON group companies, so PROCON controls mobilization and schedule.
One integrated team
Cleanroom architecture, electrical and controls, HVAC, AMHS, and equipment setting and hook-up under one contract.
Fewer interface gaps, no finger-pointing between trades, fewer delays.
COMMON QUESTIONS
FAQ.
- Who prepares the lift plan?
- PROCON does. We prepare the lift and rigging plan ourselves: load calculations, crane position, rigging and pick sequence. The safety plan and the trade sequence are set before the crane arrives.
- What specialty envelope work have you built?
- At Hyundai Motor Group Metaplant America in Ellabell, Georgia, we installed motorized skylights on the space-frame roof of the exhibition building, along with its window and door systems. At the S-JV battery plant we installed industrial mega louvers.
- Do you install architectural metal panels?
- Yes. ACM and composite panels, decorative and curved metal panels, stadium and arena exterior cladding, subroof and roof sub-framing, and metal roof panels.
- Do you also take on standard doors, windows and interiors?
- Yes. Doors, windows and glazing, louvers, ceilings, partitions and finishes under Divisions 07, 08 and 09, often in the same building as the specialty work.
KEEP EXPLORING
PLAN THE LIFT WITH US
Send us the drawings, the opening sizes and the schedule. We reply within one business day.